Website mapAdd to favouritesShenzhen ZhaoWei Machinery & Electronics Co. Ltd.

ZHAOWEI

Gear Reducer
Maunfacturer Since 1997

Keywords:

ZHAOWEI Gearbox solution
Current location: Home » Latest News » Fault elimination methods for planetary gear reducer

Fault elimination methods for planetary gear reducer

Categories: Latest NewsRelease time: 2016-01-11 13:45:00
Source: ZHAOWEIEditor: ZHAOWEI Author: ZHAOWEI

Aiming at the wear problem, the traditional solution is to repair welding or brush plating machine processing, but there are some drawbacks: high temperature thermal stress can not completely eliminate, easy to cause material damage, resulting in bending or breaking parts, and brush plating thickness limit, easy peeling, and these two methods are metal repair metal, cannot change the “hard to hard”, under the combined effect, still can cause wear.

metal planetary DC motor

And in order to solve the problem of the leakage, traditional methods need to remove and open the gear reducer, replace the gasket or the sealant has been applied, not only time-consuming and laborious, and it is difficult to ensure the sealing effect, in the operation will once again appear leakage. Micava polymer materials can be on-site control leakage, material with superior viscosity focus, oily and 350% tensile resistance, overcome the influence caused by vibration of gear reducer, good for the enterprise solves the speed reducer leakage problem.

Reducer in the long run, often wear, leakage and other failures, the most important is that:

1.reducer bearing room wear, which also includes the shell bearing box, box inside the hole bearing room, gear box bearing room wear

2.gear reducer shaft diameter wear. The main wear parts in the shaft keyway, etc.

3. reducer drive shaft bearing bit wear

4.reducer combined surface leakage

Information about

Contact ZHAOWEI

ZHAOWEI MACHINERY & ELECTRONICS CO. LTD.

Tel:+86-755-27322652

Fax:+86-755-27323949

E-mail:sales@zwgearbox.com

Add: Blk. 18, Longwangmiao Industry Park, Fuyong Tn., Bao’an Dist., Shenzhen 518103, Guangdong, China