Website mapAdd to favouritesShenzhen ZhaoWei Machinery & Electronics Co. Ltd.

ZHAOWEI

Gear Reducer
Manufacturer Since 1997

Keywords:

ZHAOWEI Gearbox solution
Current location: Home » Latest News » Installation and lubrication of planetary reducer

Installation and lubrication of planetary reducer

Categories: Latest NewsRelease time: 2015-09-06 16:27:00
Source: ZHAOWEIEditor: ZHAOWEI Author: ZHAOWEI

 Here is a brief introduction of the installation and lubrication method of planetary gear motor:

First, installation
1, planetary gear motor generally need to be installed on the horizontal surface with no more than 10 degrees.
2, the input shaft and the output shaft and power and supporting mechanical connection, such as coupling, shaft and shaft strictly on, shall not concentric, using triangle belt and chain should not be too tight or too loose.
3, the installation of the screws should not be checked regularly check whether or not to tighten, fixed firmly, gasket as far as possible the use of spring washers.
4, the installation of the foundation should be strong and reliable, and shall not have vibration, loosening phenomenon, fixed screw should be strictly in accordance with the relevant standards, regulations.

8MM metal planetary DC motor


Second, lubrication
1, the initial use of 50 hours, should immediately replace the new oil, and the body's internal oil clean, after every three months to complete replacement.
2, oil leakage, please change as soon as possible.
3, planetary gear motor generally use oil pool lubrication, using the former to pay attention must be added to the extreme pressure gear oil N220 or N320 to the specified position (minimum tooth part 20-30mm), and regular replenishment

Information about

Contact ZHAOWEI

ZHAOWEI MACHINERY & ELECTRONICS CO. LTD.

Tel:+86-755-27322652

Fax:+86-755-27323949

E-mail:sales@zwgearbox.com

Add: Zhaowei Industry Park, Middle Chaoyang Road, Yanchuan Street, Songgang Town, Bao'an District, Shenzhen, 518105, Guangdong, China