Website mapAdd to favouritesShenzhen ZhaoWei Machinery & Electronics Co. Ltd.

ZHAOWEI

Gear Reducer
Manufacturer Since 1997

Keywords:

ZHAOWEI Gearbox solution
Current location: Home » Latest News » Reduction gear motor installation method

Reduction gear motor installation method

Categories: Latest NewsRelease time: 2015-11-18 10:44:00
Source: ZHAOWEIEditor: ZHAOWEI Author: ZHAOWEI

    Reduction gear motor with its small size, high transmission efficiency, speed range is wide, many a little bit higher accuracy, and is widely used in servo, stepper, dc transmission system. Its role is on the premise of guarantee precision transmission, mainly used to reduce speed increase torque and lower than the rotational inertia of the load/motor.
The correct installation, use and maintenance of the reduction gear motor, is an important link in ensure the normal operation of machinery and equipment. Therefore, when installing a reduction gear motor, please be sure to use related matters in strict accordance with the following installation, assembly and use seriously.
    First step, before installation, make sure the motor and speed reducer are intact, and strict inspection of motor and reducer connected parts size matches, here is positioning convex sets, input shaft of the motor and reducer groove size and tolerance.

metal planetary DC motor


   Second step, unscrew the reducer flange lateral dust hole on the screw, adjust the PCS system clamping ring side holes aligned with the dust holes, insert the socket head screw. After taking the motor shaft key.
   Third step, connect the motor and reducer naturally. Connection must ensure that the reducer output shaft and motor input shaft concentricity is consistent, and the two parallel to the outer flange. Such as concentricity inconsistent, can lead to broken motor shaft or reducer gear wear and tear.
   In addition, during the installation, it is forbidden to use the hammer hit, such as prevent damage of axial force and radial force is too large bearings or gears. Must will be installed after the bolt tightening bolt screw tight force again. Before installation, the motor input shaft gear motor, positioning convex sets and rust-proof oil connected with gasoline or zinc sodium water wipe clean. Its purpose is to guarantee the tightness of the connection and operation flexibility, and prevent unnecessary wear and tear. Slow down right between the electrical and mechanical equipment installation similar between gear motor and drive motor installed correctly. The key is to must ensure that the gear motor output shaft and the driven part of the shaft concentricity.

 

Information about

Contact ZHAOWEI

ZHAOWEI MACHINERY & ELECTRONICS CO. LTD.

Tel:+86-755-27322652

Fax:+86-755-27323949

E-mail:sales@zwgearbox.com

Add: Zhaowei Industry Park, Middle Chaoyang Road, Yanchuan Street, Songgang Town, Bao'an District, Shenzhen, 518105, Guangdong, China