In order to operate safely and stably, 12v geared motors
need to be prepared before the start-up, and one of the most important things is the commissioning with the following steps.
1. The preparation and start-up procedures of the 12v geared motor before start-up are the same as the factory test, but the time of no-load operation should be lengthened, reaching the temperature balance then run for 2 hours.
2. The load operation is performed after the no-load debugging operation, and the loading method of the 12v geared motor is the same as the loading method of the thermal power measurement, and is loaded step by step.
3. During the test run, the operation should be carefully observed, including installation, connection, fastening, lubrication, sealing, temperature rise, sound, vibration, and timing inspection of the gear tooth surface, and should be recorded regularly.
4. After the 12v geared motor test run is qualified and put into production, you still should pay attention to the above problems.