A 24V DC motor with gearbox is small, yet powerful enough to be used for many applications. Because choosing the right 24V DC motor with gearbox for a specific application can be challenging, it is important to work with the right company. A popular choice is ZHAOWEI Drive, which has been creating high-quality 24V DC planetary gear motor for several years.
ZHAOWEI offers a line of micro DC gear motor 24VDC available in many different sizes, ranging from 3.4mm to 45mm in diameter. It consists of a motor as the driving force and micro planetary gearbox (reducer). Compact in size, these gear motors can deliver torque from 1.0 gf.cm to 50kgf.cm. Designed primarily for various applications, both standard and custom solutions are available.
Types of 24V DC Motor with Gearbox Available
Here, we divide it into two parts according to whether it has brush or not.
√ Brushed 24V DC motors are the most common or ‘traditional’ type, typically used in cost-sensitive applications where the control system is relatively simple.
√ Brushless 24V DC motors tend to offer longer service life, require little maintenance and deliver improved efficiency over time, although the initial cost is often higher.
Customizable Technical Parameters of 24V DC Motor High Torque Series:
Material: Plastic or Metal
Output torque: 1gf.cm -50kgf.cm
Gear ratio: 5-1500
Output speed: 5-2000rpm
Applications: automobile, 5G communication, intelligent medical, smart home, consumer electronics, intelligent robot, industrial automation, etc.
Typical Applications of 24V DC Motor with Gearbox
ZHAOWEI makes it possible to combine the 24V DC gear motor and encoder (if needed). This 24V DC gear motor with encoder can be adopted as an ideal system solution in cases where precise positioning must be performed in constrained spaces and, at the same time, high torques are required, e.g. in robotics, medical technology, laboratory automation or industrial automation. Some common typical examples include:
Automobile: Many vehicle designs, no matter both electric or other types, incorporate 24-volt DC motors at various points. They’re found powering a range of moving or adjustable components, such as wipers, seats and mirrors.
Home Automation: Handheld tools, electric curtains, rotating speakers and many more daily-use small appliances often rely on these motor types.
Robotics: Smart robots, such as children escort robots, voice communication interactive robots, walking robots and building block robots also adopt such kinds of robots.
★ Case Demonstration:
Operating voltage: 24V
Rated current:1.22 A
Minimum control angle：0.17°
Joint mode: 0〜360°
Operating temperature: 0~60°
Description: It is applied to angle sensor and gear drive device for the robot, making the rotation of robot joint and positions of other movable parts more flexible. A series of advanced manufacturing and assembly technology entails high-precision performance.
With the angle sensor encoder embedded into joints, the 24V DC motor with gearbox enables precise angular displacement within the span of 360°. Thus, robots can achieve six degrees of freedom (6 DOFs) control for actions. As for the gearbox, the adoption of planetary gearheads makes it possible to increase output torque to a higher level with small-enough backlash without impacting the overall servo dimensions. Besides, the sensing devices watch out for the change of positions, transferring the collected data to a controller, seated inside the servo housing. The controller module acts as an intellectual hub that processes the feedback to establish what needs to be adjusted to achieve the desired position. Commutation with electronics instead of brushes also allows for greater responsibility and capabilities. ZHAOWEI’s evolution of 24V DC planetary gear motor gives rise to new capabilities in robotics.
Please see our 24V Motor page for further information. Use the 24V gear motor together with an encoder to adjust the torque and any RPM within the range that you need.