The newly developed intelligent air purification system can monitor the air quality inside the vehicle at any time and perform intelligent purification to provide high-quality air in the vehicle. When the air concentration level of particulate matter (PM) is “severe” or “serious”, once the smart air purification function is activated, the vehicle air conditioning system will begin to purify the air in the car. If the window is open, the vehicle will automatically close the window when the air purification function is activated, so that the air can be quickly purified. At this time, the driver can intuitively see the changes in the concentration level of particulate matter in the car through the feedback of AVN and heating controllers. The linkage with the automobile intelligent air purification system and intelligent network system can further actively protect the health of users. The vehicle will communicate with the local air quality inspection department to obtain information about local air environmental quality and make accurate judgments. When the vehicle enters the tunnel and the PM2.5 exceeds the limit, the system will automatically switch the air conditioner to the internal circulation mode, shielding the dirty air outside the car; when the vehicle exits the tunnel, the system will automatically switch to the external circulation mode, intelligently creating a “mobile oxygen chamber” for users.
The transmission component modules for smart car air purification system include air conditioning damper actuator, active grille shutter drive gear motor, car window regulator gear motor. The transmission module structure is mainly composed of a driving motor (motor) and micro gearbox (reducer). The range of customized technical parameters is shown below:
Diameter: 3.4mm-38 mm
Voltage: ﹤24V
Output power: ﹤50W
Output speed: 5-1500rpm
Gear ratio: 2-2000
Output torque: 1.0 gf.cm -50kgf.cm
Gear Motor for Air Conditioning Damper Actuator
Category: Automobile
Voltage: 12V
No-load speed: 300±10% RPM
Load speed: 208±10% RPM
Rated load: 1.1 N.m
No-load current: 2A
Product Description: The automobile damper controller is developed and designed for specific customers and is only shown as a car damper controller program. ZHAOWEI can design, develop and produce products according to customers’ special needs. (Not limited to sales.)
Car Window Regulator Gear Motor:
Category: Automobile
Voltage: 12V
No-load speed: 300±10% RPM
Load speed: 208±10% RPM
Rated load: 1.1 N.m
No-load current: 2A
Product Description: The car window regulator gear motor is developed and designed for specific customers and is only shown as a car window regulator gear motor program. ZHAOWEI can design, develop and produce products according to customers’ special needs. (Not limited to sales.)