The monitor rotating gear motor is a kind of micro-drive gear motor with small power, which enables deceleration as well as transmission and improves the output torque. Its main transmission structure is assembled by the integrated manufacturing of a drive motor and a gearbox. The drive motor can adopt brush DC motor, BLDC motor, stepper motor and coreless motor as the drive source while the gearbox can adopt planetary gearbox and custom gearbox as the reducer. The technical parameters of monitor rotating gear motor are usually customized for development including the output power, voltage, reduction ratio, torque, transmission precision, material of gear, type of motor, structure of gearbox, transmission noise, etc.
ZHAOWEI Machinery & Electronics Co., Ltd strives to research & develop, design and manufacture micro gear motors and motorized turntable display screen gearbox with systematic customized service. The customized technical parameters provided by ZHAOWEI are shown below:
Diameter: 3.4mm-38 mm
Voltage: below 24V
Output power: below 50 W
Output speed: 5rpm-1500 rpm
Speed ratio: 2-2000
Output torque: 1.0 gf.cm -50kgf.cm
Custom Development Service Case:
Project name: Motorized Lift & Flip Tablet Gearbox for Paperless Office
Project background: Nowadays, with the applications of intelligent digital conferences in company operation and management, the paperless office system has gradually penetrated into every company. In such a system, the intelligent lifting tablet occupies an important position. This motorized monitor lift can rise to show up when needed in the conference while hidden when it is not used after the conference, making it possible to save much space of the conference table.
Project Introduction: ZHAOWEI proudly adds the structure of gearbox for flipping function on the basis of the design of motorized gearbox for lifting function for the paperless office. It adopts 24V DC as the power supply and 24V permanent magnet DC motor as the drive power source.
Technical Scheme: The motorized lift and flip tablet gearbox developed by ZHAOWEI adopts the customized mechanism of planetary gear motor meshing lead screw and nut. The load is installed on the nut and completes the synchronous lifting along with the nut. The unidirectional damping device can produce a damping force on the screw to offset the influence of load gravity on the screw, which helps to reduce the vibration and abnormal sound in the movement process of the lifting mechanism, avoid inertial impact, operate steadily and reliably, empower stable travel of the slider and bring high transmission accuracy, thus making the lifting more stable and more accurate.