There are still quality differences between gearbox and over-pressure torque gearbox in mainstream at present. Pay attention to daily maintenance including adapting optimal lubrication oil, preventing oil leakage and reducing noise and vibration, therefore the quality of gearbox can be stabilized. Being a manufacturer with a gearbox development technical team, ZHAOWEI provides several maintenance method for you.
Gearbox is a power transmission structure and a deceleration transmission device. Gearbox transforms the revolutions of motor into revolutions required by the working device and increases torque through meshing of gears with different number of tooth. For plastic extruder, gearbox is a key component, which influenced the comprehensive performance of extruder directly.
ZHAOWEI team of engineers propose that most extruder gearbox still stay at the level of poor loading capacity and low torque, and it exists differences of technologies like gear melting technology, thermoplastic processing, cold working and assembly between gearbox and over-pressure toque gearbox in mainstream. Gearbox needs to develop towards high torque, high speed and low noise to meet the extrusion requirements.
How to Maintain Gearbox with Unstable Quality?
Reduce Noise and Vibration
Reduce running noise and vibration of micro gearbox is the key to daily maintenance. ZHAOWEI suggests that we can start with the check on medium problems including spot contact of side clearance of gear pair and tooth surface, box body for deformation, gear box for overloading, gear, bearing for damage, equipment for loose connection and coupling for damage, to effectively reduce noise and vibration.
Adapt optimal lubricating oil
ZHAOWEI summarizes the common faults of extruder gearbox and find that the main manifestations of improper maintenance are incorrect brands of lubricating oil used by customers and failure to change the lubricating oil according to maintenance period.
Using lubricating oil that is not in accordance with the brands of extruder gearbox can aggravate the wear of tooth surface, shortening the service life of gear and bearing. Even if using correct lubricating oil brand, failure to maintain according to maintenance requirements and change lubricating oil timely can make a large number of sludge scale and lead to invalid lubrication system, and seriously abrade tooth surface in a short period, eventually damage bearing for lack of lubrication.
Oil Leak Inspection
Oil leak inspection is essential to gearbox maintenance, which should be proceed from machining precision and problem of sealing ring. Timed check on oil seal lip for damage, oil seal for aging, whether the cavity aperture is oversize or damage, oil return hole for unobstruction, whether the oil intake is too large, whether the fit between the oil seal lip and the journal is too loose,and whether the coaxiality of oil seal and journal meets the requirements are suggested.